Ultrasonic Carburettor cleaning

Using ultrasonic sound waves to clean carburettors is a far superior method than using sprays or chemicals to remove old fuel deposits and ground in grime.

The cleaning process is caused by microscopic air bubbles imploding on the surface of the component like tiny explosions caused by the high frequency sound waves in the ultrasonic bath.  All the holes and passages in the carburettors or any where the solution has contact with are cleaned.

No harsh or corrosive chemicals are used, only a mild detergent is used to help breakdown the years of grime that has built up over the years.  Most carburettor problems are down to dirt and grime or blocked passage ways, ultrasonic cleaning will restore your carburettors performance back to as when they were new.

Ultrasonic cleaning cleans the whole carburettor inside and out and removes dirt oil and stains etc. but it will not remove corrosion or restore the alloy to a as new appearance, basically it will clean and remove all the grime, so as long as the carburettors are in good serviceable condition they will perform as new.

If the appearance of the carburettors is of importance the ultrasonic cleaning service used in conjunction with our vapour blasting service will restore the exterior aluminium to a better than new finish which is ideal for that classic restoration project.

Our sister website is specifically for the restoration of all japanese motorcycle carburettors for more information please click on this link www.cbxcarbs.co.uk

Please note:

Your carburettors must be supplied degreased.

If you would like your carbs stripped and rebuilt you must supply the correct carb rebuild kits (excludes CBX1000).

Purchase your kits from a specialist, not cheap ones from Ebay.

Warranty of any kits supplied is with your supplier.

We do not supply any kits other than ones for Honda CBX1000's, all models.

We reserve the right to reject any work, at any time, without reason.